Arty Z7: APSoC Zynq-7000 Z7-10 Development Board for Makers and Hobbyists
Das Arty Z7-10 ist eine gebrauchsfertige Entwicklungsplattform, die auf der Basis des Zynq-7000 All Programmable System-on-Chip (AP SoC) von Xilinx entwickelt wurde.
Artikelnummer VAR-827000422
Hersteller-Teilenummer: 410-346-10
Taric/custom code: 84718090
Artikel befindet sich in und wird versendet von: Riedliengen, Deutschland
The Arty Z7 is a ready-to-use development platform designed around the Zynq-7000 All Programmable System-on-Chip (AP SoC) from Xilinx. The Zynq-7000 architecture tightly integrates a dual-core, 650 MHz ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. This pairing grants the ability to surround a powerful processor with a unique set of software defined peripherals and controllers, tailored by you for whatever application is being conquered. The design process is very straightforward and provides a systematic path between defining your custom peripheral set and bringing it's functionality up to a Linux OS running on the processor. Digilent provides a number of materials and resources for the Arty Z7 that will get you up and running with this process quickly.
Key Features
| Arty Z7-10 | |
| FPGA part | XC7Z010-1CLG400C |
| 1 MSPS On-chip ADC | Yes |
| Processor | Dual ARM Cortex A9 |
| Look-up Tables (LUTs) | 17,600 |
| Flip-flops | 35,200 |
| Block RAM | 270 KB |
| Clock Management Tiles | 2 |
| Available Shield I/O | 26 |
- ZYNQ Processor
- 650MHz dual-core Cortex-A9 processor
- DDR3 memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports
- High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
- Low-bandwidth peripheral controller: SPI, UART, CAN, I2C
- Programmable from JTAG, Quad-SPI flash, and microSD card
- Programmable logic equivalent to Artix-7 FPGA
- Memory
- 512MB DDR3 with 16-bit bus @ 1050Mbps
- 16MB Quad-SPI Flash with factory programmed 48-bit globally unique EUI-48/64™ compatible identifier
- microSD slot
- Power
- Powered from USB or any 7V-15V external power source
- USB and Ethernet
- Gigabit Ethernet PHY
- USB-JTAG Programming circuitry
- USB-UART bridge
- USB OTG PHY (supports host only)
- Audio and Video
- HDMI sink port (input)
- HDMI source port (output)
- PWM driven mono audio output with 3.5mm jack
- Switches, Push-buttons, and LEDs
- 4 push-buttons
- 2 slide switches
- 4 LEDs
- 2 RGB LEDs
- Expansion Connectors
- Two standard Pmod ports
- 16 Total FPGA I/O
- Arduino/chipKIT Shield connector
- Up to 49 Total FPGA I/O (see table below)
- 6 Single-ended 0-3.3V Analog inputs to XADC
- 4 Differential 0-1.0V Analog inputs to XADC
Associated Pmods
Overview Pmods by Digilent Inc. sorted after their name, Bus, logic level and specification version.
Pmods are designed to plug directly into Pmod host ports that adhere to the Digilent Pmod Interface Specification. Additionally, the Digilent Pmod Standard lays out guidelines for form factor, communication protocols and access to a target audience through reference manuals, code examples, user guides, and technical support.
Scope of Delivery
- 1 x Arty Z7-10 in a Digilent cardboard packaging with protective foam
References
- Manufacturer: Digilent Inc.
- Manufacturer's article name: Arty Z7: APSoC Zynq-7000 Development Board for Makers and Hobbyists
- Manufacturer's article number: 410-346-10
Resources
| Art.-ID | 100323 |
| Zustand | Neu |
| Legacy item ID | 2630 |
| Modell | 410-346-10 |
| Hersteller | |
| Herstellungsland | Taiwan |
| Inhalt | 1 Stück |
| Gewicht | 99 g |
| Netto-Gewicht | 99 g |
