Digilent Inc.

Cmod A7: Breadboardable Artix-7 (35T) FPGA Module

The Digilent Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA XC7A35T-1CPG236C.


Item number VAR-827000854

Manufacturer Product Number: 410-328-35

Taric/custom code: 84718090


Available for immediate dispatch: 0
Available for immediate dispatch:more than 100
Available for immediate dispatch: ${ $store.getters.currentItemVariation.stock.net }

Item located in and dispatched from: Riedlingen, Germany


Log in and get better prices. Or contact us and request B2B status.

* Excl. VAT excl. Shipping

The Digilent Cmod A7 is a small, breadboard friendly 48-pin DIP form factor board built around a Xilinx Artix-7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad-SPI Flash, and basic I/O devices. These components make it a formidable, albeit compact, platform for digital logic circuits and MicroBlaze embedded soft-core processor designs using Xilinx's development software, Vivado.

There are 44 Digital FPGA I/O signals and two FPGA Analog inputs that are routed to 100-mil-spaced through-hole pins so that you can integrate your programmable logic design directly into a solderless breadboard circuit. At just 0.7” by 2.75”, it can also be loaded in a standard socket and used in embedded systems.

Note:
The only difference between the Cmod A7-15T and Cmod A7-35T are the capabilities of the FPGA found on the board. They compare as follows:

  Cmod A7-15T Cmod A7-35T
FPGA part XC7A15T-1CPG236C XC7A35T-1CPG236C
1 MSPS On-chip ADC Yes Yes
Programming options Quad-SPI Flash/JTAG Quad-SPI Flash/JTAG
Look-up Tables (LUTs) 10,400 20,800
Flip-flops 20,800 41,600
Block RAM 112.5 KB 225 KB
Clock Management Tiles 5 5

Features

  • System Features
    - 512KB SRAM with an 8-bit bus and 8ns access times
    - 4MB Quad-SPI Flash
    - USB-JTAG Programming Circuitry
    - Powered from USB or external 3.3-5.5V supply connected to DIP pins
  • System Connectivity
    - USB-UART bridge
  • Interaction and Sensory Devices
    - 2 LEDs
    - 1 RGB LED
    - 2 Push Buttons
  • Expansion Connectors
    - 48-pin DIP connector with 44 Digital I/O and 2 Analog inputs (0-3.3V)
    - One Pmod connector with 8 Digital I/O

Scope of Delivery

  • 1 x Cmod A7

References

  • Manufacturer: Digilent Inc.
  • Manufacturer's article name: Cmod A7: Breadboardable Artix-7 FPGA Module
  • Manufacturer's article number: 410-328-35

Resources

Other Digilent products are available on request.



'