Xilinx Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit

The ZCU102 Evaluation Kit enables designers to jumpstart designs for Automotive, Industrial, Video and Communications applications. This kit features a Zynq UltraScale+™ MPSoC device with a quad-core ARM® Cortex-A53, dual-core Cortex-R5 real-time processors, and a Mali-400 MP2 graphics processing unit based on Xilinx's 16nm FinFET+ programmable logic fabric. The ZCU102 supports all major peripherals and interfaces enabling development for a wide range of applications.

Key Features

• Optimized for quick application prototyping with Zynq Ultrascale+ MPSoC
• DDR4 SODIMM – 4GB 64-bit w/ ECC attached to Processor Subsystem (PS)
• DDR4 Component – 512MB 16-bit attached to Programmable Logic (PL)
• PCIe Root Port Gen2x4, USB3, Display Port & SATA
• 4x SFP+ cages for Ethernet
• 2x FPGA Mezzanine Card (FMC) interfaces for I/O expansion including 16 x 16.3 Gb/s GTH transceivers and 64 user defined differential I/O signals

Hardware

Featured Xilinx Devices

• XCZU9EG-2FFVB1156I MPSoC
• Processors: ARM® quad-core Cortex-A53, dual-core Cortex R5, Mali-400 MP2 GPU
• IO: 406
• LC: 480K
• BRAM: 32.1 Mb

Configuration

• Onboard JTAG configuration circuitry to enable configuration over USB
• Dual Quad-SPI flash memory
• Boot from SD card
  
  Communication & Networking
• RGMII communications at 10, 100, or 1000 Mb/s. Serial GMII interface-supports a 1 Gb/s SGMII interface
• 4x SFP+ cage
• SMA GTH support (4x SMA Tx/Rx connectors)
• UART To USB bridge
• RJ45 Ethernet connector
• SATA (1 x GTR) (note1)
• PCIe Gen2x4 Root Port (note1)
  
  Expansion Connectors
• 2x FMC-HPC connectors (16 GTH Transceivers, 64 differential user defined signals)
• 2x PMOD headers
• IIC
  
  Control & I/O
• 6x Directional Push Buttons (5x PL, 1x PS)
• DIP switches (8x PL)
• PMBUS & System Controller MSP430 for power, clocks, and I2C bus switching
• USB2/3 (MIO ULPI and 1 GTR) (note1)
  
  Memory
• PS 4GB DDR4 64-bit SODIMM w/ ECC
• PL 512MB DDR4 component memory ([256 Mb x 16] devices) at 1200MHz / 2400Mbps DDR
• 8KB IIC EEPROM
• Dual 64MB Quad SPI flash
• SD card slot
  
  Display
• HDMI video input and output (3 GTH)
• External Retimer device driving an HDMI output connector
• 9x GPIO user LEDs (8x PL, 1x PS)
• VESA DisplayPort 1.2 source-only controller supports up to two lanes of main link data at rates of 1.62 Gb/s, 2.70 Gb/s, or 5.40 Gb/s.
  
  Clocking
• Programmable clocks
• System clocks, user clocks, jitter attenuated clocks
• 2x SMA MGT input clocks
  
  Power
• 12V wall adapter or ATX

Scope of Delivery

• ZCU102 Evaluation board featuring the Zynq UltraScale XCZU9EG-2FFVB1156I MPSoC
• Access to a full seat of Vivado® Design Suite: Design Edition
  • Node-locked and device-locked to the XCZU9EG
• Design examples and targeted reference designs for easy onboarding
• ZCU102 Peripherals: Power Supply, USB Cables, Ethernet Cable, USB Hub

Additional Information

• Manufacturer: Xilinx
• Manufacturer's article name: Xilinx Zynq UltraScale+ MPSoC ZCU102 Evaluation Kit
• Manufacturer's article number: EK-U1-ZCU102-G
• Manufacturer product page
• Xilinx Solution Center
• Xilinx User Community Foren