Flexible peripheral modules for all your designs

Pmod™ devices are Digilent’s line of small I/O interface boards that offer an ideal way to extend the capabilities of programmable logic and embedded control boards. They allow sensitive signal conditioning circuits and high-power drive circuits to be placed where they are most effective - near sensors and actuators.

Pmod modules communicate with system boards using 6, 8, or 12-pin connectors that can carry multiple digital control signals, including SPI and other serial protocols. Pmod modules allow for more effective designs by routing analog signals and power supplies only where they are needed, and away from digital controller boards.

Overview Pmod AMP3

The Pmod AMP3 uses a 2W Class-D audio power amplifier, the Analog Devices SSM2518. Users are able to provide stereo audio through either I2S or TDM at a variety of sampling frequencies. The I2C interface can be used to configure the digital volume and dynamic range control, although the Pmod may also be used in a stand-alone mode without the I2C interface.

Features

Audio amplifier with left and right channel separation
Stereo output via two standard 1/8“ (0.32 cm) mono speaker jacks
Supports common I²S audio formats
Digitally configurable volume control for each channel
Dynamic range control
Stand-alone mode for systems without I²C interface
Small PCB size for flexible designs 1.5” × 0.8“ (3.8 cm × 2.0 cm)
12-pin Pmod connector with I²C interface

Scope of Delivery

1 x Pmod AMP3 in a custom antistatic Pmod packaging

Pmod Hardware Compatibility Guide

Digilent's guide about determining hardware compatibility.

References

Manufacturer: Digilent Inc.
Manufacturer's article name: Pmod AMP3: Stereo Power Amplifier
Manufacturer's article number: 410-270

Resources

Other Digilent products are available on request.

ID de l’art.	100279
État
ID de l'ancien article	2061
Modèle	410-270
Fabricant	Digilent Inc.
Pays de fabrication	Taiwan
Contenu	1 pièce
Poids	16 g
Poids net	16 g

Pmod AMP3: Stereo Power Amplifier