Digilent Inc.
Pmod PMON1: Power Monitor
The Pmod PMON1 is a power monitoring system that uses the Analog Devices AD5112 and ADM119.
Item number VAR-827000372
Manufacturer Product Number: 410-265
Taric/custom code: 84718090
Item located in and dispatched from: Riedlingen, Germany
Flexible peripheral modules for all your designs
Pmod™ devices are Digilent’s line of small I/O interface boards that offer an ideal way to extend the capabilities of programmable logic and embedded control boards. They allow sensitive signal conditioning circuits and high-power drive circuits to be placed where they are most effective - near sensors and actuators.
Pmod modules communicate with system boards using 6, 8, or 12-pin connectors that can carry multiple digital control signals, including SPI and other serial protocols. Pmod modules allow for more effective designs by routing analog signals and power supplies only where they are needed, and away from digital controller boards.
Overview Pmod PMON1
The Pmod PMON1 is a power monitoring system that uses the Analog Devices AD5112 and ADM119. By using I2C, users can set a reference voltage on the AD5112 to indicate what qualifies as an overcurrent condition for the ADM119. Once an alert condition occurs, users can also program alarms or other events to occur.
Features
- Monitor current draw less than 1.058 A
- Wide range of configurable alert conditions
- Monitor voltages from 3.16 V to 26 V
- Configurable device address for up to nine modules in a single system
- Small PCB size for flexible designs 1.2“ × 0.8” (2.8 cm × 2.0 cm)
- 2×4-pin connector with I2C interface
- Follows Digilent Pmod Interface Specification
Scope of Delivery
- 1 x Pmod Pmon1 in a custom antistatic Pmod packaging
Pmod Hardware Compatibility Guide
Digilent's guide about determining hardware compatibility.
References
- Manufacturer: Digilent Inc.
- Manufacturer's article name: Pmod PMON1: Power Monitor
- Manufacturer's article number: 410-265
Resources
