Reyax
RYS8830_EVB: Small form factor & Ultra Low Power 1.8V UART/I2C Interface GNSS Antenna Module Evaluation Board EVB Version
Small form factor & Ultra Low Power 1.8V UART/I2C interface GNSS antenna module
Numero di variazione (MEPA): VAR-827002073
Codice produttore: RYS8830_EVB
Codice doganale: 85177900
Disponibile per la spedizione immediata: ${ $store.getters.currentItemVariation.stock.net }
Ritardo di spedizione previsto oltre la disponibilità a magazzino: 2 - 4 settimane
Articolo situato in e spedito da: Riedliengen, Germania
29,95 EUR
*
Contenuto
1
Effettua il login e ottieni prezzi migliori. Oppure contattateci e richiedete lo stato B2B..
* IVA Excl. escl. Costi di spedizione
Description
The REYAX RYS8830 is built on the high performance of the SONY CXD5605AGF GNSS engine. The RYS8830 modules utilize concurrent reception of GNSS systems offering high sensitivity in a small SMD form factor.
◆ SONY CXD5605AGF Engine
◆ Small SMD form factor 121mm^2
◆ Enhanced GNSS Filter and Low Noise Amplifier
◆ Ultra-low power consumption
◆ Up to Position accuracy 1.0 m CEP
◆ Embedded Antenna
| ID articolo | 101711 |
| Condizione | |
| Modello | RYS8830_EVB |
| Produttore | Reyax |
| Paese di produzione | |
| Contenuto | 1 undefined |
| Peso | 150 g |
| Peso netto | 100 g |
Features
| Item | Min. | Typical | Max. | Unit | Condition |
|---|---|---|---|---|---|
| Power Supply Voltage | 1.75 | 3.3 | 3.6 | V | VBATT |
| 0.9 | 1.8 | 1.95 | V | VDD_LDO_IN |
GNSS continuous mode
| Item | Min. | Typical | Max. | Unit | Condition |
|---|---|---|---|---|---|
| Satellite acquisition Current | 16 | 19 | mA | ||
| Satellite tracking Current | 9 | 13 | mA | ||
| Idle Current | 3.7 | mA | Waiting for command | ||
| Sleep2 mode current | 200 | uA | |||
| Satellite acquisition Current | 11.5 | mA | Use buck regulator | ||
| Satellite tracking Current | 8.2 | mA | Use buck regulator | ||
| Idle Current | 3.3 | mA | Use buck regulator | ||
| Sleep0 mode current | 0.5 | mA | Use buck regulator | ||
| Sleep1 mode current | 0.26 | mA | Use buck regulator | ||
| Sleep2 mode current | 0.26 | mA | Use buck regulator |
GNSS low power mode
| Item | Min. | Typical | Max. | Unit | Condition |
|---|---|---|---|---|---|
| Satellite tracking average current | 2.6 | 8.2 | mA | Use buck regulator @GSOP command Sleep1 and normal mode cycle | |
| I2C slave | I2C clock : 400kHz Address length : 7 bits Slave address : 0x24 | ||||
| Default Baud Rate | 115200 | bps | 8,N,1 | ||
| Digital input level high | 0.7*VDD | VDD+0.3 | V | VIH | |
| Digital input level low | -0.3 | 0.3*VDD | V | VIL | |
| Digital output level high | 0.8*VDD | VDD | V | VOH 2mA | |
| Digital output level low | 0 | 0.2*VDD | V | VOL 2mA | |
| Flash size | 8 | M-bit | |||
| GNSS Center Frequency | 1561.098 1575.42 1602.5625 | MHz | BeiDou GPS Glonass | ||
| Navigation update rate | 1 | Hz | |||
| Accuracy | 1 | M | Signal strength is -130dBm | ||
| Cold starts | 35 | Sec. | Signal strength is -130dBm | ||
| Hot starts | 1 | Sec. | |||
| Tracking Sensitivity | -161 | dBm | |||
| Hot starts Sensitivity | -160 | dBm | |||
| Cold starts Sensitivity | -147 | dBm | |||
| Operating Temperature | -40 | 25 | +85 | ˚C | |
| Dimensions | 11mm*11mm*2.2mm | ||||
| Weight | 0.43 | g |
