Digilent Inc.
Pmod OC1: Open collector output
Can drive high current devices using MMBT3904 output transistors. The transistors are driven by logic signals from a Digilent system board.
Item number VAR-827000330
Manufacturer Product Number: 410-062
Taric/custom code: 84718090
Item located in and dispatched from: Riedlingen, Germany
Flexible peripheral modules for all your designs
Pmod™ devices are Digilent’s line of small I/O interface boards that offer an ideal way to extend the capabilities of programmable logic and embedded control boards. They allow sensitive signal conditioning circuits and high-power drive circuits to be placed where they are most effective - near sensors and actuators.
Pmod modules communicate with system boards using 6, 8, or 12-pin connectors that can carry multiple digital control signals, including SPI and other serial protocols. Pmod modules allow for more effective designs by routing analog signals and power supplies only where they are needed, and away from digital controller boards.
Overview Pmod OC1
The Pmod OC1 is an open collector BJT module using MMBT3904 transistors. Users can then drive high current devices (up to 200 mA) by providing logic signals from the host board.
Features
- Four 100mA (200mA max) MMBT3904 transistors
- Four output clamp diodes
- 40V voltage threshold
- Small PCB size for flexible designs 1.0“ × 0.8” (2.54 cm × 2.0 cm)
- 6-pin Pmod connector with GPIO interface
- Follows Digilent Pmod Interface Specification Type 1
Scope of Delivery
- 1 x Pmod OC1 - Open collector output
Pmod Hardware Compatibility Guide
Digilent's guide about determining hardware compatibility.
References
- Manufacturer: Digilent Inc.
- Manufacturer's article name: Pmod OC1: Open Collector Output
- Manufacturer's article number: 410-062
Resources
