Flexible peripheral modules for all your designs

Pmod™ devices are Digilent’s line of small I/O interface boards that offer an ideal way to extend the capabilities of programmable logic and embedded control boards. They allow sensitive signal conditioning circuits and high-power drive circuits to be placed where they are most effective - near sensors and actuators.

Pmod modules communicate with system boards using 6, 8, or 12-pin connectors that can carry multiple digital control signals, including SPI and other serial protocols. Pmod modules allow for more effective designs by routing analog signals and power supplies only where they are needed, and away from digital controller boards.

Overview Pmod PMON1

The Pmod PMON1 is a power monitoring system that uses the Analog Devices AD5112 and ADM119. By using I2C, users can set a reference voltage on the AD5112 to indicate what qualifies as an overcurrent condition for the ADM119. Once an alert condition occurs, users can also program alarms or other events to occur.

Features

Monitor current draw less than 1.058 A
Wide range of configurable alert conditions
Monitor voltages from 3.16 V to 26 V
Configurable device address for up to nine modules in a single system
Small PCB size for flexible designs 1.2“ × 0.8” (2.8 cm × 2.0 cm)
2×4-pin connector with I2C interface
Follows Digilent Pmod Interface Specification

Scope of Delivery

1 x Pmod Pmon1 in a custom antistatic Pmod packaging

Pmod Hardware Compatibility Guide

Digilent's guide about determining hardware compatibility.

References

Manufacturer: Digilent Inc.
Manufacturer's article name: Pmod PMON1: Power Monitor
Manufacturer's article number: 410-265

Resources

Other Digilent products are available on request.

Item ID	100273
Condition	New
Legacy item ID	2053
Model	410-265
Manufacturer	Digilent Inc.
Manufacturing country	Taiwan
Content	1 piece
Weight	18 g
Net weight	18 g
Customs tariff number	84718090

Pmod PMON1: Power Monitor